Energy
Home Backup Battery Sizing: Calculate kWh From Your Appliances
Build a home battery sizing worksheet from watts and run time. Check usable kWh, simultaneous inverter load and motor starting surge.
Size a home backup battery in two steps. Add the watt-hours used by every appliance during the outage, then check whether the inverter and battery can supply the loads that may run together. The first step gives you an energy requirement in kWh. The second gives you a power requirement in kW.
- 100 W lights × 4 h
- 400 Wh
- 20 W router × 4 h
- 80 Wh
- Total at the appliances
- 480 Wh
Illustrative appliance draw before conversion losses.
Turn an outage into a load schedule
Multiply each appliance’s power in watts by its actual hours of operation. In a four-hour outage, 100 W of lights used for all four hours draw 400 Wh. A 20 W router that runs continuously draws 80 Wh. Together they use 480 Wh, or 0.48 kWh, before conversion losses and before adding any other load.
A refrigerator cycles, so its running watts multiplied by the full outage can overstate the energy it uses. At the same time, a short motor start may demand more power than its running watts. Use a safe, correctly rated plug-in meter for supported appliances and ask the installer to verify the surge allowance for larger loads.
Ask what reaches the backup circuits
If the two example loads together use 0.48 kWh and a hypothetical system delivers 90% of the energy taken from the battery, they would need about 0.53 kWh from storage. That is before any reserve or extra load. If a supplier already quotes usable AC output, do not count the same conversion loss twice.
Write down the longest outage you want to cover, the minimum reserve and the circuits to be backed up. Ask for usable energy, continuous output and compatible surge ratings for the specific equipment. Bring those requirements to a qualified installer before selecting the equipment.
Further reading
VORAVUE Verify
Evidence: A · Primary-source confirmed
The example applies the EIA distinction between power and energy. It is a planning worksheet, not a system specification.